Promotional American Flag Pins, Patriotic USA Flag Lapel Pins, Country Flag Lapel Pins, US State Flag Lapel Pins, & Crossed Flag Jewelry Pins

Stick pin with slogan "Don't Tread On Me" on it under a coiled rattler snake sitting on a small patch of grass. Complies with Prop 65. 1/2" W x 1/2" H..

This high quality lapel pin is sure to make a great impression. Each piece is struck into high grade brass, filled with jewelry quality hard enamel and hand polished. The finish is glassy and the colors are vibrant and bright. Each pin is plated in 24kt gold, silver or copper. 1 1/2" W..

A great economical alternative to struck pins! Each design is etched into brass using a photo acid process. The recessed areas are then hand-filled with soft enamel and covered with an optional epoxy coating at no extra cost. Etched pieces are slightly thinner than struck pins and plated in 24kt gold, silver or copper. 1 1/2" W..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/2" Diameter..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/2" W..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/2" W x 1" H..

This high quality lapel pin is sure to make a great impression. Each piece is struck into high grade brass, filled with jewelry quality hard enamel and hand polished. The finish is glassy and the colors are vibrant and bright. Each pin is plated in 24kt gold, silver or copper. Complies with Prop 65. 1 1/4" W..

Perfect for simple designs without any color or for solid shapes. Each pin has a brilliant 24kt gold, silver or copper metal finish on both the raised and recessed areas of the design. 1 1/4" W..

This is, by far, our most popular style pin for convention give-away, events and low-cost promotions. Pins are struck from high grade steel and plated with brass or nickel. Includes free setup, up to 4 enamel colors and butterfly clutch. All colors must be bordered by metal lines. 1 1/4" W..

A great, lower cost alternative to cloisonne. Each piece is struck into high grade brass, filled with soft enamel colors and plated with either 24kt gold or silver plate. Free Pantone color matching. Interior cutout holes are extra. All colors must be bordered by metal lines. 1 1/4" W..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/4" Diameter..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/4" Diameter..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/4" W..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/4" W..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/4" W..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/4" W x 1" H..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/4" W x 1/2" H..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/4" W x 3/4" H..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/4" W x 3/4" H..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/4" W x 3/4" H..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1 1/4" W x 7/8" H..

This high quality lapel pin is sure to make a great impression. Each piece is struck into high grade brass, filled with jewelry quality hard enamel and hand polished. The finish is glassy and the colors are vibrant and bright. Each pin is plated in 24kt gold, silver or copper. 1 1/8" W..

This is, by far, our most popular style pin for convention give-away, events and low-cost promotions. Pins are struck from high grade steel and plated with brass or nickel. Includes free setup, up to 4 enamel colors and butterfly clutch. All colors must be bordered by metal lines. 1 1/8" W..

A great, lower cost alternative to cloisonne. Each piece is struck into high grade brass, filled with soft enamel colors and plated with either 24kt gold or silver plate. Free Pantone color matching. Interior cutout holes are extra. All colors must be bordered by metal lines. 1" W..

1" Enamel Pin. Complies with Prop 65. 1" W..

Our imported photo or screen printed pins are perfect for designs that require a custom outer shape (shields, crossed flags, circles with banners.) Includes free setup, full photo print or 4 color screen print, steel base metal, epoxy coating and butterfly clutch backing. 1" W..

Please note our stock and custom selection of patriotic bag goodies. 1" H..

Digitally printed full-color image with military clutch attachment. Lapel Pin are gold tone. Alternate backs available. Great for charities & charitable causes, fundraising runs & walks, recognition events, police & fire departments, commemorative events, schools, and more. Made in the U.S.A. Union made. 1" W x 1" H..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 3/4" W..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1" W..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 1" W x 3/4" H..

Custom die struck cast metal pieces. Enamel colors are spray painted after nickel finish and then baked at 400 degrees fahrenheit. Other style or shape items are made of sublimatable coating for detail design. 1 1/2" L..

A great, lower cost alternative to cloisonne. Each piece is struck into high grade brass, filled with soft enamel colors and plated with either 24kt gold or silver plate. Free Pantone color matching. Interior cutout holes are extra. All colors must be bordered by metal lines. 1 1/2" W..

Our imported photo or screen printed pins are perfect for designs that require a custom outer shape (shields, crossed flags, circles with banners.) Includes free setup, full photo print or 4 color screen print, steel base metal, epoxy coating and butterfly clutch backing. 1 1/4" W..

This high quality lapel pin is sure to make a great impression. Each piece is struck into high grade brass, filled with jewelry quality hard enamel and hand polished. The finish is glassy and the colors are vibrant and bright. Each pin is plated in 24kt gold, silver or copper. 1/2" W..

Perfect for simple designs without any color or for solid shapes. Each pin has a brilliant 24kt gold, silver or copper metal finish on both the raised and recessed areas of the design. 1/2" W..

This is, by far, our most popular style pin for convention give-away, events and low-cost promotions. Pins are struck from high grade steel and plated with brass or nickel. Includes free setup, up to 4 enamel colors and butterfly clutch. All colors must be bordered by metal lines. 1/2" W..

A great, lower cost alternative to cloisonne. Each piece is struck into high grade brass, filled with soft enamel colors and plated with either 24kt gold or silver plate. Free Pantone color matching. Interior cutout holes are extra. All colors must be bordered by metal lines. 1/2" W..

A great economical alternative to struck pins! Each design is etched into brass using a photo acid process. The recessed areas are then hand-filled with soft enamel and covered with an optional epoxy coating at no extra cost. Etched pieces are slightly thinner than struck pins and plated in 24kt gold, silver or copper. 1/2" W..

The lapel pin is a great way to show your support. Our pins cost less than our competitors, but are equal or higher quality. This lapel pin has an all gold metal lacquered design with a metal clutch pin, and baked on enamel finish. 1" W x 1" H..

This high quality lapel pin is sure to make a great impression. Each piece is struck into high grade brass, filled with jewelry quality hard enamel and hand polished. The finish is glassy and the colors are vibrant and bright. Each pin is plated in 24kt gold, silver or copper. 3/4" W..

Die striking gives you highly detailed reproduction of your design. We use only the finest brass, individually strike and trim each piece to shape and then finish it to perfection. Antique finishes create contrast by darkening the recessed areas while the raised areas remain lighter. Color fills are applied to recessed metal areas. In addition, you..

Our imported photo or screen printed pins are perfect for designs that require a custom outer shape (shields, crossed flags, circles with banners.) Includes free setup, full photo print or 4 color screen print, steel base metal, epoxy coating and butterfly clutch backing. 3/4" W..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 3/4" W..

When you are short on time, look no further than our USA made rush photo products. A fully printed label is placed onto a stock metal shape and then protected with a clear poly-coating. Only stock outer shapes are available for this style. All items require an exposed metal edge. 3/4" W..